Stable and Reliable Replacement Plate Heat Exchanger Gaskets

Stable and Reliable Replacement Plate Heat Exchanger Gaskets

The thickness of the plate heat exchanger plates is generally between: 0.4-0.8mm, the specific needs are determined according to the process, if you want to use the process of high pressure or high temperature, you can appropriately thicken the plate.

When the fluid in the Gasket Plate Heat Exchanger flows on the wall, the dissolved salts in the fluid often precipitate on the wall, deposit and form a certain thickness of the scale layer, and sometimes the wall will be damaged by corrosion. Such surface scaling or corrosion will reduce the heat transfer coefficient, especially when the fluid boils, due to the rapid development of dirt will lead to corrosion under the scale. Therefore, plate heat exchanger equipment has certain requirements for fluid media.

In the process of designing, installing and using Welded Plate Heat Exchanger, we must strictly control the fluid flow speed, keep the equipment clean and tidy inside, and operate through the appropriate mode of operation, so as to achieve good heat transfer effect, reduce superheat, reduce additional energy consumption, and achieve the purpose of energy saving and emission reduction.