Gasket Plate Heat Exchanger For Condenser Water Heater

Gasket Plate Heat Exchanger For Condenser Water Heater
Plate heat exchanger in addition to maintenance in special cases, should also be carried out regular maintenance. Because the plate heat exchanger is convenient to disassemble and assemble, the maintenance is simple, and special tools and equipment are generally not required. Different methods can be used according to different situations, if the equipment does not leak, but the heat transfer system K has decreased, do not open the heat exchanger, and use a closed-circuit system to drive the detergent into the equipment for a few hours. There is no such condition on the site, and when the scale is not too serious after disassembling the equipment, you can wash the plate directly with water without removing it, and brush it with a soft brush.
Keeping the plate clean is one of the important conditions to maintain a high heat transfer coefficient. Between the plates, the medium moves along the narrow and tortuous flow channel, and even if the scale layer is not too thick, it will cause the transformation of the flow channel, significantly affecting the movement of the fluid, so that the pressure drop increases and the heat transfer coefficient decreases. For example, a sugar factory uses a plate heat exchanger in heating, because the secondary water is not well treated, the entire flow path will be blocked in only two months during use and can not continue to run.
The main products of Jiangsu Baode include Brazed Plate Heat Exchanger; gasket plate heat exchanger, Shell And Tube Heat Exchanger, etc.