Refrigeration Semi-welded Plate Heat Exchanger Gasket
Jiangsu baade Heat exchanger Co., Ltd. is the production of plate heat exchanger, Plate Heat Exchanger Gaskets, plate heat exchanger plates professional manufacturers.
The materials of Gasket Plate Heat Exchanger mainly include plate, plug, end cover, gasket and other components. If the use of inferior materials, easy to occur corrosion, deformation, aging and other problems, shorten the service life of the heat exchanger, therefore, in the purchase and use of wire corrugated plate heat exchanger, should pay attention to the selection of high-quality materials to extend its service life. Gasket plate heat exchanger is usually used in a harsh environment, such as high temperature, high pressure, acid and other corrosive media, if the environmental conditions are too harsh, will accelerate the damage of the heat exchanger, therefore, in the use of the process, measures should be taken to protect the heat exchanger, such as installing protection, regular maintenance of the heat exchanger. The design parameters of gasket plate heat exchanger include plate spacing, plate Angle, plate slope, fluid velocity, etc. These parameters affect the heat transfer double rate and resistance characteristics of the heat exchanger. If the design parameters are unreasonable, the heat transfer efficiency of the heat exchanger will be reduced, the resistance will be increased, and the service life of the heat exchanger will be shortened. Therefore, in the design and operation process, the appropriate parameters should be selected according to the specific situation.