Evaporator Applied Heater Plate Heat Exchanger Plate
plate heat exchanger plates are the core component of the heat exchanger, generally a metal material sheet through pressing to form surface ripples, superimposed to form a fluid channel. Conventional slab thickness are: 0.4, 0.5, 0.6, 0.7, 0.8, 1.0 mm.
Gasket Plate Heat Exchanger after a period of service life, there will be scaling phenomenon, especially in the water, soda conditions, cold water due to high temperature heating will produce some calcium and magnesium ions, and then attached to the surface of the plate, in the long run, it will reduce the heat transfer efficiency of the heat exchanger plate, to the heat exchanger to the bad effect. Then at this time we need to clean the plate heat exchanger.
The Brazed Plate Heat Exchanger is a plate heat exchanger made by brazing adjacent stainless steel corrugated plates in a vacuum brazing furnace using pure copper (or nickel) as filler metal. The weight of the brazed plate heat exchanger is light: only 20-30% of the Shell And Tube Heat Exchanger, reducing transportation and installation costs. The brazed plate heat exchanger is compact in structure: it uses thin stainless steel plate, high heat transfer coefficient and low retention.