Rubber Plate Heat Exchanger Gasket Flat Rubber Gaskets
The temperature and medium parameters of Plate Heat Exchanger Gaskets are not the same with different glue. Such as nitrile rubber is generally suitable for non-polar media such as alkanes and olefins with temperatures higher than -25 and lower than 120 degrees Celsius, light and heavy fuels and other mineral oils, lubricants, animal and plant oils, hot water, salt water and other media. Eppropylene diene rubber is mainly suitable for superhot water with temperature higher than -50 and lower than 150 degrees Celsius, water vapor, atmospheric ozone, non-petroleum lubricating oil, weak acid, weak base, ketone, alcohol and other media.Fluorine rubber is mainly suitable for non-polar mineral oil with temperature higher than 0 and lower than 180 degrees Celsius, such as pump oil, lubricating oil, etc., and can also be used for food oil.
Brazed Plate Heat Exchanger structure type
A, single process structure The most conventional flow channel structure, 4 nozzle on the same side, should not be blocked, suitable for the heat source water temperature is high.
B, dual flow structure special flow structure, 4 nozzle is not on the same side, suitable for installation, suitable for heat source water temperature is not high.
The pressure bearing capacity of brazed plate heat exchanger is also better than that of Gasket Plate Heat Exchanger.