How To Choose The Plate Mmaterial of Marine Plate Heat Exchanger

Plate heat exchangers are widely used in many industries due to their high heat transfer performance. Especially in the Marine industry, the plate heat exchanger can be seen everywhere in the central cooler system. Considering the particularity of Marine cooler, the choice of plate heat exchanger plate is very important, today Baode simply take you to understand the following:
1. Central cooler
The central cooler is generally a heat exchange device that handles the entire cooling system. Generally, seawater is used as a cold source, considering the high content of chloride ions contained in seawater, so we recommend using titanium plates as plate heat exchanger plate material.
2. fresh water cooler
As the name suggests, both sides of the fresh water cooler are made of fresh water medium, so at this time we can consider the use of stainless steel 304 and stainless steel 316L these two materials.
3. Oil cooler

Lubricating oil cooler is to the generator host oil cooling equipment, one side of the lubricating oil side of the sea water, the selection of material elements and the same as above, consider the use of titanium plate for plate heat exchanger plate material, plate heat exchanger rubber pad material recommended to use NBRP (Ding Qing).

With the longer service life of Gasket Plate Heat Exchanger, leakage is a situation that can occur at any time. The reason, most of the reason is that the Plate Heat Exchanger Gaskets have a problem, which may be misplaced, aging, corrosion and so on.

Baode is a professional manufacturer of Brazed Plate Heat Exchanger; gasket plate heat exchanger, Shell And Tube Heat Exchanger, etc.